|
autor: Vlček Ondřej
, publikováno 8.8.2005
|
Je tu další týden a my Vám přinášíme nové Firmware optických mechanik firem: AOpen (1×), Benq (3x), LG (2×), MSI (1x), NEC (2x), Plextor (1x), Sony (1×), Samsung (2×), Teac (6x) a BIOSy pro základní desky: Abit (2×), Albatron (17×), AOpen (2×), ASRock (6×), Asus (3×), Biostar (10×), Chaintech (3×), DFI (3×), ECS (2×), EPoX (8×), Jetway (1×), Magic-Pro (1×), Shuttle (1×), Supermicro (3×), Tyan (3×).
Ještě bych vás chtěl poprosit, aby jste po mě v diskuzi pod článkem nepožadovali BIOSy konkrétních výrobců a typů základních desek. Budou zde vždy pouze všechny BIOSy, které výrobci uvolnili minulý týden. Pokud mi nějaký nový BIOS unikl, budu samozřejmě rád, když mě na to upozorníte...
VGA - Grafické karty
- AL8 BIOS version 1.4
- Fixed the issue that BIOS will only show one processor when a dual core CPU is installed.
- tRAS will be shown correctly now.
- EIST now works as intended.
- AL8-V BIOS version 1.4
- Fixed the issue that BIOS will only show one processor when a dual core CPU is installed.
- tRAS will be shown correctly now.
- EIST now works as intended.
- K8Ultra-U Pro BIOS version R1.07d(Beta)
- Supports E6 stepping CPU.
- K8Ultra-U BIOS version R1.07d(Beta)
- Supports E6 stepping CPU.
- K8X890 ProII BIOS version R1.10c(Beta)
- Supports E6 stepping CPU.
- K8X890 Pro BIOS version R1.10c(Beta)
- Supports E6 stepping CPU.
- K8SLI BIOS version R1.10
- Supports E6 stepping CPU.
- K8Ultra-V ProII BIOS version R1.06a(Beta)
- Supports E6 stepping CPU.
- K8Ultra-V BIOS version R1.06a(Beta)
- Supports E6 stepping CPU.
- K8Ultra-V Pro BIOS version R1.06a(Beta)
- Supports E6 stepping CPU.
- K8NF4X BIOS version R1.10
- Supports E6 stepping CPU.
- K8NF4U BIOS version R1.10
- Supports E6 stepping CPU.
- K8X250GB Pro BIOS version R1.02
- Supports E6 stepping CPU.
- i945Pa-PLF BIOS version R1.04
- Fixed CMOS checksum error when watchdog event occurs.
- Fixed secondary channel unavailable if SATA is set to combine mode.
- Fixed 840 CPU ratio error.
- Fixed EIST function fail in 840 CPU
- Added Intel Onscreen Branding support for Pentium D CPU and Pentium Extreme Edition CPU.
- Updated Microcode to support more CPUs.
- i945Ga-PLF BIOS version R1.04
- Fixed CMOS checksum error when watchdog event occurs.
- Fixed secondary channel unavailable if SATA is set to combine mode.
- Fixed 840 CPU ratio error.
- Fixed EIST function fail in 840 CPU
- Added Intel Onscreen Branding support for Pentium D CPU and Pentium Extreme Edition CPU.
- Updated Microcode to support more CPUs.
- Fixed PCI-Express card no display in boot block.
- K8Upgrade-PCIE BIOS version 1.20
- Cool 'n' Quiet table updated.
- Supported new CPU with upgrade CPU card:
- K8 939 Athlon64 Rev.E6 3400+/3800+
- K8 939 Athlon 64X2 Rev.E4 3800+
- K8 939 Athlon 64X2 Rev.E6 3800+/4200+/4600
- 939A8X-M BIOS version 1.60
- Added the patch for Turkish Win98SE.
- Supported new CPU with upgrade CPU card:
- K8 939 Athlon64 Rev.E6 3400+/3800+
- K8 939 Athlon 64X2 Rev.E4 3800+
- K8 939 Athlon 64X2 Rev.E6 3800+/4200+/4600+
- Updated Cool "n" Quiet table.
- K8 Upgrade-1689 BIOS version 2.0
- Added the patch for Turkish Win98SE.
- Supported new CPU with upgrade CPU card:
- K8 939 Athlon64 Rev.E6 3400+/3800+
- K8 939 Athlon 64X2 Rev.E4 3800+
- K8 939 Athlon 64X2 Rev.E6 3800+/4200+/4600+
- Fine tuned ATi X700 VGA card with War Craft IIIT
- BIOS version 1.1
- Updated Cool "n" Quiet table
Final
- A8V-E Se BIOS version 1002
- P5GL-MX BIOS version 0501
- Adjust CPU Fan low limit to 1200 RPM and other fan to 800 RPM.
- A7S8X-MX BIOS version 1007
- Fixde some PCI card init fail, its report Could not find enough free base memory. on Intel Lan card
- K8T890-A9(K8T89-A9) BIOS version 2005/08/08 with | without bootup Biostar splash screen
- I91GL-M7U BIOS version 2005/08/08 with | without bootup Biostar splash screen
- N4SLI-A9 BIOS version 2005/08/08 with | without bootup Biostar splash screen
- -Updated bios source code.
- K8T890-A7(K8T89-A7) BIOS version 2005/08/08 with | without bootup Biostar splash screen
- I945P-A7 BIOS version 2005/08/08 with | without bootup Biostar splash screen
- iDEQ 330G BIOS version 2005/08/08 with | without bootup Biostar splash screen
- iDEQ 220M BIOS version 2005/08/08 with | without bootup Biostar splash screen
- iDEQ 350G BIOS version 2005/08/08 with | without bootup Biostar splash screen
- NF325-A9 BIOS version 2005/08/04 with | without bootup Biostar splash screen
- iDEQ220K BIOS version 2005/08/08 with | without bootup Biostar splash screen
- MK8M800 BIOS version V3.0
- SK8T800-000LC BIOS version V4.0
- SK8T800-000LD/SK8T800-000LE BIOS version V3.0
- KV2 Extreme(1.0) BIOS version 1.2E
- Support new AMD 939 Dual core CPU ADA3800DAA5CD.
- Fixed, system shows error message when update BIOS.
- Support AMD 939 Rev:E6 CPU.
- Support new AMD 939 E4 revision CPU.
- Support AMD E3 CPU.
- Fix the CPU temperature
- To improve the compatibility of ATI VGA card.
- Remove SIS SATA control item.
- Support K8 939 Rev.D0 CPU and FX-55 CPU.
- To revise some CPU temperature are not accurate.Support performance mode.
- Support K8 CPU micro code.
- Support new K8 Sempron CPU.
- Support performance mode.
- KV2 Lite(1.0) BIOS version 1.2B
- Support new AMD 939 Dual core CPU ADA3800DAA5CD.
- Fixed, system shows error message when update BIOS.
- Support AMD 939 dual core CPU.
- Support AMD 939 Rev:E6 CPU.
- Support new AMD 939 E4 revision CPU.
- EP-9NPAJ BIOS version 05.07.28
- Support Dual core CPU(E6).
- Added DDR433 DDR466 DDR500 Support for E vertsion CPU.
- PST table updated.
- Supported above 4G memory.
- New EPTP support.
- EP 5VKMI BIOS version 05.07.26
- Fixed MAC address in DMI not stable.
- EP-5EGMI BIOS version 05.07.28
- Support EIST CPU(6XX CPU).
- Support EPTP.
- EP-5EDAI BIOS version 05.08.02
- Support EIST CPU(6XX CPU).
- Support Thunder Probe Support.(EPTP)
- EP-8KDA3I V3.x BIOS version 05.08.02
- Add MCT2 code.
- Fix winbond ROM flash fail.
- Update DMI mainboard base information.
- Support AMD K8 754 Version E6 Sempron 64 CPU.
- EP-9NPA+Ultra BIOS version 05.07.28
- Support Dual core CPU(E6).
- Added DDR433 DDR466 DDR500 Support for E vertsion CPU.
- PST table updated.
- Supported above 4G memory.
- New EPTP support.
- EP-8KDA7I BIOS version 05.08.02
- Add MCT2 code.
- Fix winbond ROM flash fail.
- Update DMI mainboard base information.
- Support AMD K8 754 Version E6 Sempron 64 CPU.
- EP-8KDA3I BIOS version 05.08.02
- Add MCT2 code.
- Fix winbond ROM flash fail.
- Update DMI mainboard base information.
- Support AMD K8 754 Version E6 Sempron 64 CPU.
- MP-P6V-DG BIOS version M03
- Set watchdog to avoid some VGA card boot fail.
- PDSMP-8 / PDSMP-i BIOS version zip | exe
- X6DH3-G2 BIOS version zip | exe
- PDSM4 / PDSME BIOS version zip | exe
Final
- Tiger i7525 (S2672) BIOS version 1.10
- Updated descriptions of ACPI Power Features
- Fixed ECP mode in Parallel Port Mode and removed the option of ECP + EPP
- Fixed the an issue where "can't find string" with
- Hyper-threading disabled
- Fixed an issue where a dummy password string is shown during the entering of the bios setup menu and after setting up a password in the BIOS
- Fixed an issue where the keyboard and mouse will malfunction while entering WinXP with USB disabled in the BIOS
- Removed the "resume on time" option from the BIOS
- Added Irwindale Xeon CPU support
- Tomcat i845GV BIOS version 1.04
- Upgraded CPU micro code to support P4 E0 stepping CPU's
- Solved an issue where the bios would not save and exit properly when using a P4 E0 stepping CPU's
- Set WOR to [Disable] as the bios default setting
Beta
- Thunder K8SD Pro BIOS version 303e
- Fixed an IOMMU issue
- Fixed an issue where fan's lower than 1500RPM are not displayed correctly
- Fixed an issue where some CPUs report too high temperature (~70°C)
Zdroj / Source: Motherboard manufacturer’s websites, Station Drivers
Redakce si vyhrazuje právo odstranit neslušné a nevhodné příspěvky. Případné vyhrady na diskuze(zavináč)pctuning.cz
78
